This is a more thorough inspection, ideally performed when the machine is clean and cool.
Secure Harness Clips and Tie-Wraps: Ensure all clips that hold the harness to the frame are intact and secure. Loose harnesses will vibrate and chafe, leading to premature failure. Replace missing or broken clips.
Inspect Connectors: Carefully unplug major connectors (after ensuring the machine is powered off).
Check for Corrosion: Look for green/white deposits on the pins and sockets. Clean with electrical contact cleaner if necessary.
Check Seals: Ensure the rubber seals on the connectors are present, pliable, and not damaged. These are critical for weatherproofing. Replace damaged seals.
Check Locking Mechanism: Ensure the connector locks securely to prevent vibration from loosening it.
This 504-3603 chassis harness is used for 374F excavator.
Related part number:
102-8802
8T-8729
8T-8730
3S-2093
3T-4688
9X-0196
8T-8737
8T-8799
8T-8827
110-8769
103-2529
9W-0852
9W-0844
125-7874
125-7875
9X-3402
126-1768
9G-4336
2L-8069
2L-8079
9X-3401
126-1767
155-2270
155-2260
239-7356
230-4009
455-0709
230-4011
455-0704
230-5010
455-0707
243-4505
243-4510
264-5732
288-7324
272-5000
230-4013
281-8803
455-0705
324-5824
324-5825
342-2972
435-3145
125-7876
9G-4343
342-2973
