Post-Installation:
After installation, the bushing's inner diameter should be checked for any deformation caused by the pressing force.
The pin is reinstalled with new seals and O-rings, and the joint is greased thoroughly until grease is seen purging from all seals, ensuring all air is expelled and the cavity is full.
This 236-6273 bushing is used for 320C excavator.
Related part number:
7Y-4660
7Y-4669
7Y-4695
9X-3601
188-4211
236-6273
188-4216
188-4218
247-8856
7Y-5102
259-0733
266-7956
266-7959
7Y-4672
165-9290
188-4217
114-0760
7Y-4673
7Y-5215
259-0743
7Y-4669
7Y-4695
9X-3601
188-4211
236-6273
188-4216
188-4218
247-8856
7Y-5102
259-0733
266-7956
266-7959
7Y-4672
165-9290
188-4217
114-0760
7Y-4673
7Y-5215
259-0743
